![]() ^this would be the version you wanted to upload. Now, if you have multiple versions of code that have been extracted to your AP, there is a switch that can be used, /versionĪrchive upload-sw /version t ![]() Once the file is 'created' in my target directory it becomes the same as the PC version. With my Mac, even though I did a chmod 777 on my tftp directory, I had to do the following before I attempted to upload the software. XigmaNAS is an open source NAS / OS software appliance. ![]() On the Mac, I found it to be a little bit different. View, compare, and download cisco tftp server at SourceForge. Once you've stopped then started the server, you simply need to issue the commandĪs this command is running, it extracts the current running IOS, including the HTML files, and tar them as it's sending to the TFTP server. I tested this with TFTPd32 on a PC, and with TFTPServer on a Mac(10.6). The first thing you need, is a TFTP server. In this example, I am using a 1131, running 12.4(21a)JY Here is a quick recap showing how to process the code with the archive command!Įver lost the code you were running on an AP? Then need to load that code to another? What if that codes not available for download from CCO anymore? Well, there's a pretty easy process to get through to get the image from an AP, and onto your TFTP server. Since Cisco is locking down software downloads, you may have a need to pull code off your existing access points. 10.7.6 Packet Tracer Use a TFTP Server to Upgrade a Cisco IOS Image (Instructor Version) Addressing Table Objectives Scenario Instructions.
0 Comments
Leave a Reply. |